Technical Data; Filtering And Lubrication Requirements - Truper TPN-875 Manual De Instrucciones

Technical Data

Disc Diameter
Spindle Diameter
Vibration Level
Air Consumption
Hose Minimum
Recommended Diameter
Air Pressure
CAUTION
Please consider the increase in pressure in the line or the hose inside diameter to compensate the use
of too long hoses (more than 8 meters). The hose minimum inside diameter shall be 3/8" and the connectors shall be
1/4 NPT. Use the right size and good quality couplers and accessories.

Filtering and Lubrication Requirements

CAUTION
Dust, water and lack of oil specific for pneumatic tools are the main cause of potential flaws with the tool. We
recommend installing a
reducing 80% oil consumption significantly increasing the breathing air quality for the operator.
• The filter-oil feeder system must be regulated to administer 3 to 6 drops per minute.
• Drain the water in the air compressor tank and also condensation in the hoses before using the tool.
Consult the air compressor instructions.
Air
Compressor
Code
Description
Noise Level
Free Speed
Weight
Brand UNI-LL-1/4 centralized filter-oil feeder system. This system assures lubrication
Feeder System
Disc
(not included)
TPN-875
101072
Air angle grinder
4 1/2"
3/8"
< 1.6 m/s
98 dB
11000 RPM
3.9 lb
4.6 CFM
3/8"
621 kPa (90 PSI)
UNI-LL-1/4
Centralized
Filter-Oil
2
Air Hose
Adapter
(not included)
ENGLISH
3