Manuales relacionados para Truper TPN-875-2
Resumen de contenidos para Truper TPN-875-2
- Página 1 Manual Mini Angular 1/4” Die Grinder Chuck Applies for: Model Code TPN-875-2 16886 TPN-875-2 Use oil continuously and WARNING dosed to lubricate the tool. Read this manual thoroughly CAUTION before using the tool.
-
Página 2: Tabla De Contenido
Manual before using the tool. Parts Assembly Keep this manual for future references. Start up The illustrations in this manual are for reference only. They might be different from the real tool. Maintenance Authorized service centers Warranty policy TPN-875-2 ENGLISH... -
Página 3: Technical Data
Technical Data TPN-875-2 Code 16886 Description Mini angular die grinder Air Input 1/4 NPT Chuck 1/4” Vibration Level < 3.2 m/s Noise Level 84 dB Free Speed 20 000 RPM Weight 1 lb Air Consumption 2.5 CFM Hose Minimum Recommended Diameter 3/8”... - Página 4 General Safety Warnings for Pneumatic Tools Keep your work area clean, tidy and well lit. Wear adequate protective safety accessories. CAUTION CAUTION Cluttered and dark areas may cause accidents. Wear eye protection, dust mask, non-skid safety shoes, helmet and ear plugs. In normal conditions, the risk of Never use the tool in explosive areas or in the presence injury is reduced.
-
Página 5: Pneumatic Tools
Risk Control When Using Pneumatic Tools Risk of injury in head and eyes To prevent head and eyes injuries WARNING • Compressed air out of pneumatic • Always, when operating pneumatic equipment wear equipment may be dangerous. Objects like brackets, burrs, protection glasses in compliance with the ANSI Z87.1 splinters, dust and other residues may be impelled towards Standard. - Página 6 Risk Control When Using Pneumatic Tools Risk of injuries To prevent injuries WARNING • Damaged hoses may burst and cause • Do not abuse the hose or the connectors. serious injuries or deafness. • Keep the hose away from sharp or abrasive edges. •...
-
Página 7: Parts
Parts Collet 1/4” Chuck Handle Trigger Switch Trigger Lock Regulating Screw Air Input Mounting Wrenches Assembly Accesory Installation • Double check the accessory rod (A) is the same size as the installed chuck diameter (B). • Use only accessories specified for the grinder RPM or bigger. -
Página 8: Start Up
Start Up Air intake connection Fast Connector (not included) • Connect the air hose to the tool using a female fast connector (A) (not included). When working with Intake different pneumatic tools and a single compressor, you Air Hose can quickly connect and disconnect tools exchange them easily. -
Página 9: Authorized Service Centers
Authorized Service Centers In the event of any problem contacting a Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free number 800 0187 8737 to get information about the nearest Authorized Service Center. -
Página 10: Warranty Policy
Transportation costs resulting from compliance of this warranty will be covered by . For questions or comments, call 800 0187 8737. Imported by: Truper, S.A. de C.V. , Parque Industrial #1, Jilotepec, Edo. de Méx., Méx. C.P. 54240, Made in China Stamp of the business: Delivery date: www.truper.com...