Alliance Laundry Systems SWD441C Manual De Instalación página 13

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Sink Installation
For this type of installation, use the beaded tie-down
strap (supplied in accessories bag), or use a large wire
tie (available from your local hardware store) and
secure the drain hose to the cabinet top hinge (refer to
Figure 8). This will prevent the drain hose from
dislodging during use.
1
2
1
Drain Hose
2
Tie-Down Strap (Wire tie or tape if necessary)
Figure 8
In-the-Wall Installation
For installations of this type, the drain hose MUST
be secured to one of the inlet hoses using the beaded
tie-down strap from accessories bag.
NOTE: End of drain hose must not be below 24 in.
1
2
3
1
Drain Hose
2
Tie-Down Strap (Tape if necessary)
3
Inlet Hoses
Figure 9
801504
SWD599N
SWD599N
H023I
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Laundry Tub Installation
For this type of installation, the drain hose MUST be
secured to the stationary tub to prevent hose from
dislodging during use. Use the beaded tie-down strap
(supplied in accessories bag) to secure hose.
1
2
1
Drain Hose
2
Tie-Down Strap (Tape if necessary)
Figure 10
Installation
SWD600N
SWD600N
11

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido