Control Panel - Kenmore 405.84126 Manual De Uso

CONTROL PANEL
POWER button with OPERATION
indicator
Power switch on/off.
SLEEPbuffen
Used to initiate the SLEEP
operation.
O
FAN buften
Press to select four different fan
speed settings: LOW, MED, Hi
and AUTO. An indicator light
will illuminate for each speed
setting.
O
O
O
UP(>) and DOWN (<) buften
Press to increase or decrease
temperature settings in 2°F (1°C) Ir_
increments from 62°F (17°C) to
88°F (30°C), or TIMER setting
from 0 to 24 hrs.
NOTE: Temperature can be displayed
in Fahrenheit or Celsius. To change
from one to the other, press and hold
the Up and Down buttons at the same
time for 3 seconds.
MODE buffen
Press this button to seJect the
operating mode in a sequence
that advances from AUTO to
COOL to DRY to FAN. An indicator
light will illuminate for each mode
setting.
TIMER buffen
Used to initiate the AUTO ON start
time and AUTO OFF stop time program,
in conjunction with the < & > buttons.
An indicator light will illuminate with
each setting.
SWING buffen
Press this button to begin continuous
up and down swing of fan louver
door. Press again to fix louver door
intoone position.
LED Display
Shows the set temperature in °C or
°F and the Auto-timer settings.
While in DRY and FAN modes, the
display shows the room temperature.
13