DRAMINSKI GMM Manual De Uso página 20

You can leave the modification mode by turning off
the power supply.
ATTENTION
The name for which the modification has been
made, is marked with „*" sign.
2. ERASING MODE:
This operation restores the factory settings for the
chosen sample name (it removes all the correc-
tions for one species).
To select ERASE DATA, hold down the „CAL/cancel"
ton, then press the  „UP" button and accept the key and turn on the power with the „ON/OFF" but-
ERASE option by pressing the „OK" button.
After you've accepted the password in the modifica-
will appear. That can be changed using  or  tion mode menu the name of the last tested sample
After you've accepted the selected name the „OK"
message will appear. At this point all adjustments will
be removed. The „*" symbol will be also removed
with the previously modified type of grain.
The „OK" message will appear and all adjustments
will be removed. The „*" symbol will be also removed
with the previously modified type of grain.
Pressing „CAL/ " will cause the canceling of this
CANCEL
operation and the information „CANCEL" will be dis-
played. You can leave the modification mode by turn-
ing off the power supply.
CHAPTER 4 | DATA MODIFICATION
EN
19