Nswering System Display Messages; Andset Sound Signals; Roubleshooting Uide - GE 21025 Guía De Uso

A S
NSWERING
0-59
CL (blinking)
--
An (blinking)
F (blinking)
LA (Line Access)
(blinking)
H S
ANDSET OUND
Signal
A long warbling tone (with ringer on)
Three short beeps
One short beep (every 7 seconds)
T
ROUBLESHOOTING
T S
ELEPHONE OLUTIONS
No dial tone
• Check or repeat installation steps.
• Make sure base power cord is connected to a working electrical outlet.
• Make sure the telephone line cord is connected to the base and the
modular phone jack.
• Connect another phone to the same jack; if there is still no dial tone, the
problem might be your wiring or local service.
• The cordless handset may be out of range of the base. Move closer to
the base.
• Make sure the battery is properly charged (16 hours).
D
YSTEM ISPLAY
Total number of messages.
The voice time/day stamp needs set.
Answerer off.
Currently answering a call.
Memory is full.
External line remote answerer.
Recording Announcement or memo.
S
IGNALS
G
UIDE
M
ESSAGES
Meaning
Signals an incoming call
Page signal
Low battery warning
51