Linking The Detector To A Chime Or Switching Receiver - Honeywell Home RCA902N Instrucciones De Instalación

Linking the Detector to a Chime or Switching Receiver

The detector has a unique identification code that prevents inadvertent and unwant-
ed interference from other products operating in the area. In order for movement
detected by the detector to trigger the lights or Chime this code needs to be learned
by either the Switching Receiver or Chime Unit.
Learn Mode Motion Detector
To enable your chime to learn the identity of your detector:
• Press the l programming button and keep it pressed. Each Icon will light in
turn. When the Icon you want is lit, release the button.
• While the Icon you have selected is lit, operate your Detector. The chime will
sound. The Icon will flash.
11
RCA902N
69-2157EFS—09