Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL DATA
Parameter description
Parameter value
Product name
Bead Roll
Model
MSW-RM18S
Maximum thickness of
Steel: 1.2
the worked material
Aluminium: 1.8
[mm]
Working hole length
457 (18'')
[mm]
Holder length [mm]
280
Dimensions [mm]
760x196x90
Weight [kg]
26,1
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines,
using
state-of-the-art
technologies
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
a trouble-free operation, use it in accordance with this user
manual and regularly perform the maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
Legend
Read instructions before use.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Wear protective goggles.
Wear a dust mask (respiratory tract protection).
Wear protective gloves.
ATTENTION! Danger of hand crushing.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual machine.
The original operation manual is in German. Other
language versions are translations from German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in serious injury or even
death.
6
U S E R M A N U A L
Whenever "device" or "product" are used in the warnings
and instructions, it shall mean bead roll. Do not exceed the
maximum thickness of the worked material!
2.1. SAFETY AT THE WORKPLACE
a)
Make sure the workplace is orderly and well lit.
A messy or poorly lit workplace may lead to accidents.
Try to anticipate what may happen, observe what is
going on and use common sense when working with
the device.
b)
This device is not intended to be used by persons
(including children) with limited physical, sensory
or mental aptitudes or lack of experience and/or
knowledge, unless they are supervised by a person
responsible for their safety or have received instruction
from this person as to how the device is used.
c)
This device may be operated by physically fit persons
who are properly trained and able to handle the
machine and who reviewed this operating manual and
received training in occupational health and safety.
d)
If any device damage or abnormal operation is found,
stop its use immediately and notify the authorised
person.
and
e)
In case of doubt whether the product operates
correctly or finding damage please contact the service
centre of the manufacturer.
f)
Only the service centre of the manufacturer can make
repairs of the product Do not attempt to make repairs
yourself!
g)
Children or unauthorised persons are forbidden from
entering a work station. (A distraction may result in
a loss of control over the device.
h)
During workpiece working, take care of strangers and
their safety.
i)
Carefully observe the workpiece during working to
avoid its damage and prevent any possible hazard.
j)
Maintain order and remove any dust, debris and waste
material after working.
k)
If a multitude of elements is manufactured, they
should be stored in such a way before and after
working that allows keeping order at the workstation.
REMEMBER! When using the device, protect children
and other bystanders.
2.2. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
When working with the device, use common sense
and stay alert. Temporary loss of concentration whilst
using the device may lead to serious injuries.
c)
Use personal protection equipment as required
for working with the device, specified in section 1
(Legend). The use of correct, approved personal
protection equipment reduces the risk of suffering an
injury.
d)
Do not overestimate your abilities. When using the
device keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
e)
Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
Rev. 24.07.2018
f)
Before device operation, remove all regulating tools
or wrenches. Any tool or wrench left inside a rotating
part of the device can result in injuries.
g)
The material to be worked should be free of impurities.
h)
Do not touch movable parts or accessories during
device operation.
i)
Use protective gloves to avoid a hurt by sharp edges.
j)
Do not work elements made of hard materials.
k)
Interference in the device construction in order to
change its parameters or structure is forbidden.
l)
Do not touch the gear during device operation.
2.3. SAFE DEVICE USE
a)
Do not overload the device. Use appropriate tools for
the given task. A correctly selected device will perform
the task for which it was designed better and in a safer
manner.
b)
When not in use, store in a safe place, away from
children and people not familiar with the device, who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
c)
Maintain the device in a good technical state. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of the
device. If damage is discovered, hand over the device
for repair before use.
d)
Keep the device out of the reach of children.
e)
Device repair or maintenance should be carried out by
qualified persons, only using original spare parts. This
will ensure safe use.
f)
To ensure the operational integrity of the device, do
not remove factory fitted guards and do not loosen
any screws.
g)
When transporting and handling the device between
the warehouse and the destination, take into account
the occupational health and safety principles for
manual transport operations which apply in the
country where the device will be used.
h)
Use the device to work elements of parameters
conforming with the data given in the technical data
table. Do not exceed the permissible dimensions of
the worked material.
i)
Do not work two workpieces at the same time
j)
Long workpieces must be supported and set stably for
working.
k)
Do not use excessive force during cranking. This can
damage the movable device elements.
3. USE GUIDELINES
The Bead Roll is designed for manual sheet working, i.e.
gouging, milling and cutting, depending on the roll used.
The user is liable for any damage resulting from non-
intended use of the device.
Rev. 24.07.2018
3.1. DEVICE DESCRIPTION
1
6
8
7
5
4
2
3
1.
Crank
2.
Allen wrench
3.
Exchangeable rolls
4.
Base
5.
The place to install rolls
6.
Pressure adjustment screw
7.
Shaft
8.
Gear wheel
3.2. PREPARING FOR USE
Appliance location:
•
The device shall always be used on an even, stable,
clean and dry surface and out of reach of children and
persons of unsound mind.
•
The operator shall have enough space to operate
the device and crank as well as to avoid being hurt,
damaging the worked material or any other types of
personal injuries.
Installing the appliance
Attach the bead roll base to the working top or insert it in
a vice or a stand (not included in the delivery).
Install the preferred set of rolls (the roll with a relief and the
roll with a cavity) on the shaft end in the place marked in
the description as the place to install rolls. Once the rolls are
installed, fasten them to the shaft using the screw (A) with
the washer and tighten the screw (B) with Allen wrench to
press the roll against the shaft.
6
B
A
A
In case of cutting tools, install the suitable rolls (without
splines or furrows) on the shaft before and fasten them using
the screw (B). Then, use the screws (C) to screw on the ends
to the rolls as shown in the picture below.
7
Publicidad
