Inserting And Installing The Mould; Maintenance And Care; Environmental Operating Conditions - Microson M4RIC Manual De Uso

inserting and installing the mould
Insert the mould or adapter into the ear canal.
Place the hearing aid behind the ear.
Check that the device is correctly supported.
en
32
maintenance and care
INFORMATION
- Clean the moulds frequently using specially
designed wipes. (Consult your specialist).
- Regular use of a dehumidifier is recommended
to keep your hearing aid in optimum working
conditions. (Consult your specialist).
- Always have a spare battery to hand.
ATTENTION!
- Never clean your hearing aids with alcohol, peroxide
or detergents. Use a soft, damp cloth.
Do not get your hearing aids wet!
DOMES / ADAPTERS
Cerumen (ear wax) in the domes / adapters or moulds
affects sound quality.
Clean the domes / adapters or moulds immediately
after removing the receiver with a soft cloth. No
other tools are required.
environmental operating conditions
For optimum operation we recommend using your
hearing aids within a range of 0 / 40 ˚C (degrees
Celsius). Likewise, the relative humidity during
storage should not exceed 95%.
33
en