Stool Packaging - Euronda CORAL Manual De Instrucciones

CORAL
PART 2

STOOL PACKAGING

After unpacking the stool, check that the structure and artificial leather comply with order specifi-
cations.
The stool is delivered as follows:
- seat-base assembly (A)
- backrest support inverted (B)
- anatomic backrest fixed to base (C)
- polyethylene bag (D) fixed to backrest support and containing one 6 mm. Allen key and two sock-
et screws (M 8x20).
- plastic bag containing 5 wheels complete of pivot pin.
Prior to assembly, proceed as follows:
ATTENTION: All maintenance must be performed by authorised qualified personnel.
1. Open the polyethylene bag (D) and remove the Allen key and screws.
2. Use the Allen key to slacken the three screws fixing the backrest support (B) as indicated by the
arrows.
3. Detach the anatomic backrest (C) from the base.
4. Insert the wheels on the apposite places under the base and press them.
Proceed with assembly as described below.
6