Stool Adjustment - Euronda CORAL Manual De Instrucciones

1. The anatomic backrest (C) can be adjusted in the direction (F1) with respect to the support (B)
in three positions: central, right side and left side.
To adjust, remove screws (F) by means of the 6 mm Allen key, position the backrest as required,
and tighten screws (F) to secure.
2. To adjust the depth (G1) of the backrest support (B) , slacken the three screws (G) by means of
the 6 mm Allen key and slide the support (B) along the slots to the required position. To secure,
tighten the three screws (G).
3. Seat (A) can be rotated in both directions (A1).
4. To adjust the seat height (H1), lightly press ring (H) under the seat, at any point around the cir-
cumference as required.
8

STOOL ADJUSTMENT

CORAL