Routine Maintenance; Stool Cleaning; Special Maintenance; Cushion Replacement - Euronda CORAL Manual De Instrucciones

STOOL CLEANING

All the external parts of the stool hawe to be regularly cleaned with a detergent based of non-
ionic-cationic surfactants, inorganic salts, glycol.
ATTENTION: ALL MAINTENANCE MUST BE PERFORMED BY AUTHORISED QUALIFIED PERSONNEL.

CUSHION REPLACEMENT

(reference exploded drawing page 12)
a) Turn the cushion over and use the 6 mm Allen key to slacken the three screws (34) fixing the
backrest support (7) and remove the latter.
b) Use a 4 mm Allen key to remove the three screws (33) fixing the hub cover (17) and lift to
remove.
c) Use a 4 mm Allen key to remove the three screws (30) fixing the fixed hub (8) to the padded
cushion (1)
d) Remove the lower section of the seat by lifting it from the base (23).
e) Remove the eight screws (27) securing the cushion to the fixed nylon ring (2) by means of
a Phillips screwdriver.
f) Remove the fixed ring from the cushion and fit on the new cushion, taking care that the three
slots on the ring are aligned with the three cushion fixing bushes.
g) Reassemble the seat in reverse of the above.

BACKREST REPLACEMENT

(reference exploded drawing page 12)
a) Turn the stool over and use the 6 mm Allen key to slacken the two screws (32) fixing the
backrest (5) to the backrest support (7).
b) Use a Phillips screwdriver to remove the three screws (31) securing the fixing plate (4) to the
backrest (3).
c) Remove the fixing plate and fit onto the new backrest with the aid of a rubber faced mallet.
d) Reassemble in reverse order of the above.
10
PART 4

ROUTINE MAINTENANCE

SPECIAL MAINTENANCE

CORAL