System Settings - Telefunken DPF Serie Manual De Instrucciones

5. System settings

This menu allows you to set the operating parameters of your frame.
- Language
You can change the operating language for your frame at any time in this
menu.
Select the "Language" option onscreen using the "Up/Down" keys on the
remote, then press the "Right/Left" keys to choose:
. French
. German
. Italian
. Dutch
. Portuguese
. Spanish
. English
Brightness
-
Select the "Brightness" option onscreen using the "Up/Down" keys on the remote, then press the
"Right/Left" keys to adjust the brightness.
Contrast
-
Select the "Contrast" option onscreen using the "Up/Down" keys on the remote, then press the
"Right/Left" keys to adjust the contrast.
- Colour saturation
Select the "Saturation" option onscreen using the "Up/Down" keys on the remote, then press the
"Right/Left" keys to adjust the saturation.
- Tint
Select the "Tint" option onscreen using the "Up/Down" keys on the remote, then press the
"Right/Left" keys to adjust the tint.
Programmed automatic start-up
-
This setting lets you activate or disable programmed automatic start-up for your TELEFUNKEN frame.
Select the "Start-up" option onscreen using the "Up/Down" keys on the remote, then press the
"Right/Left" keys to choose:
. On
. Off
- Programmed start-up time
Select the "Automatic start-up time" option onscreen using the "Up/Down" keys on the remote, then:
- Press the "Right/Left" keys to set the hour
Press the "Down" key to select minutes
-
Non contractual document subject to change in case of typographical errors (Mktg0609)
13