Installation; Use Your Frame; Selecting A Language; Reading A Memory Card Or A Usb Key - Telefunken DPF Serie Manual De Instrucciones

2. Installation

- Take your frame and its accessories out of their packaging.
- Remove the plastic film protecting the front of the frame.
- Pull the plastic tab protecting the contacts in the remote control.
- Stand the frame in the desired location, pulling the adjustable stand towards you (see diagram
above).
- Connect the electrical cord to the frame in the space provided.
Plug your frame into an outlet. Your frame will start up automatically.
II.

Use your frame

1. Selecting a language

During its first use, the frame will display an initial screen allowing
you to choose the language.
- Select your language using the arrow keys on the remote
control, then press "ENTER".
Once you have selected your language, your frame will begin to
read the photos contained in its internal memory.

2. Reading a memory card or a USB key

If your frame is off:
- Insert your card or USB key in the space provided.
- Switch on your frame: The slideshow will automatically play the contents of your memory card
or USB key.
If your frame is on:
Press the "Exit" key on your remote as many times as necessary for the
-
mode selection screen to come up
- Using the "Up /Down" keys on your remote, select the card or key you
want to read (The top icon for internal memory, or the icons for memory
card or USB key)
Press the "Enter" key on your remote to confirm your choice, then the
"Slideshow" key to launch the slideshow.
If your media (memory card, USB key or built-in memory) contains music and if
you want to play a musical slideshow, press the "Enter" key during the
slideshow. The digital frame will display "Slide with music".
Non contractual document subject to change in case of typographical errors (Mktg0609)
3