Utilization - Soehnle CHILL & GO 3D Instrucciones De Manejo

EN

7. Utilization

Test the massage seat pad prior to use by carefully sitting down
on it. When in resting position, the massage heads will be in your
lumbar area. Carefully lean onto the back rest to find out how
much pressure you would like to use.
It is important that you sit in the middle so that the massage
heads do not massage the spine. Due to the removable seat pad,
the massage seat pad can easily be positioned on all commonly
available chairs.
On/off switch
Use the On/Off switch to switch the device on.
Selecting the massage type and massage area
The device is e uipped with 2 different massage types, each with
a variety of options.
1. 3D deep tissue shiatsu massage
"Shiatsu" is a Japanese term meaning "finger pressure": shi =
finger, and atsu = pressure. It is a vitalizing and strengthening,
circular finger pressure massage.
2. Rolling massage
A rolling massage is a calming and relaxing massage along the
spine.
Use the operating keys of the desired massage type to select the
area to be massaged.
You can then choose between a massage of the full back, the
upper or lower back.
The massage type "Shiatsu" can also provide a selective massage.
The precise point to be massaged can be controlled by pushing
and holding the / keys.
During the "rolling" massage it is also possible to regulate the
individual width of the massage heads by pushing and holding
the key.
After selecting the massage area, you will be able to add pleasant
warmth by using the heat function key.
Note: The heat function can be used only in combination with a
massage type.
The massage strength can be individually adjusted with the remo-
vable backrest.
19