golmar SV-220S Manual De Instalación página 37

36
D
oor panel positioning.
1650
The upper part of the door panel should be placed at 1,65m.
The door panel has been designed to be placed under most of the environmental conditions.
However it´s recommended to take additional cautions, like the use of the supplieed rainproof
cover or the installation under a covered place.
To obtain a good quality picture on video door entry systems, avoid direct incidence from light
sources (sun, streetlights, ...). It´s recommended the use of an external illumination source in
case of low light conditions.
With help of a plain screwdriver, remove the aluminium front
making a light pressure in the door panel bottom holes, as
shown on the picture.
DOOR PANEL INSTALLATION
Unscrew the door panel bottom screws.
1850
1450
R
emove the aluminium front.