Assembly - Skil PS4561C-00 Manual Del Propietário

ASSEMBLY

WARNING
parts, making adjustments, cleaning, or when not in use.
WARNING
could result in serious personal injury.
WARNING
is misuse and could result in a hazardous condition leading to possible serious injury.
Unpacking
This product requires assembly.
Carefully remove the product
•
listed on the box are included.
Inspect the tool carefully to make sure that no breakage or damage occurred during
•
shipping.
Do not discard the packing material until you have carefully inspected and satisfactorily
•
operated the tool.
If any parts are damaged or missing,
•
Connect the Telescoping Pole to
the Power-head Pole(Fig .2)
1. Remove the battery pack.
2. Align the raised rib on the power-head pole
with the arrow on the telescoping pole and
push the power-head pole into the tele-
scoping pole.
3. Twist the front threaded sleeve onto the
threaded connection of the telescoping
pole securely.
4. Pull on the power-head pole to verify that it
is securely locked in place.
WARNING
tightened before operating the equipment; check it periodically for tightness during use
to avoid serious personal injury.
To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the tool when assembling
If any parts are damaged or missing, do not operate this product until
the parts are replaced. Use of this product with damaged or missing parts
Do not attempt to modify this tool or create accessories not
recommended for use with this tool. Any such alteration or modification
and any accessories from the box.
Be certain that the front
threaded sleeve is fully
please return the product to the place of purchase.
Fig. 2
Front Threaded Sleeve
Make sure that all items
Power-head Pole
Telescoping Pole
Threaded Connection
11