Part Names; Air Intake; Air Conditioner Operations And Performance; Adjusting Air Flow Direction - mundoclima MVD AC2 CL23500 Manual De Instalación Y Usuario

‡ To avoid damaging the remote controller, exercise caution when
using it and replacing its batteries. Do not place objects on top of it.
‡ Do not place appliances that have naked flames under or near the
unit, as heat from the appliance can damage the unit.
‡ Do not place the unit's remote controller in direct sunlight. Direct
sunlight can damage the remote controller's display.
‡ Do not use strong chemical cleaners to clean the unit, as doing so
can damage the unit's display or other surfaces. If the unit is dirty
or dusty, use a slightly damp cloth with very diluted and mild
detergent to wipe the unit. Then, dry it with a dry cloth.
‡ Children shall not play with the appliance.

9. Part Names

The figure shown above is for reference only and may be slightly
different from the actual product.

Air Intake

Air Filter(inside)
Air Outlet
Figure 9.1

10. Air Conditioner Operations and Performance

The operating temperature range under which the unit runs stablyare
given in below table.
Mode
Cooling If the indoor humidity is abov e 80%, condensation
may f orm on the surf ace of the unit.
Heating
Caution
‡ The unit performs stably in the temperature range given in
above table. If the indoor temperature is outside the unit's
normal operating range, it may stop running and display an
error code.
To ensure the desired temperature is achieved efficiently, ensure that:
All windows and door are closed.
The airflow direction is adjusted to work in running mode.
The air filter is clean.
Please note how you can best save energy and achieve the best
cooling/heating effect.
Regularly clean air filters inside indoor units.
Horzontal Air Outlet Louver
Indoor temperature
17-32°C
” 27°C
Check
regularly
Avoid too much outdoor air coming into air-conditioned spaces.
Note that outlet air is cooler or heater than set room temperature.
Avoid direct exposure to outlet air as it may be too cool or hot.
Maintain a proper air distribution. Air outlet louvers should be
used to adjust the direction of outlet airflow, as doing so might
ensure more efficient operation.

11. Adjusting Air Flow Direction

Since warmer air rises and cooler air falls, the distribution of
warmed/cooled air around a room can be improved by positioning the
unit's louvers. The louver angle can be adjusted by pressing the
[SWING] button on the remote controller.
29
Figure 10.1
Close doors and windows.
Figure 10.2
Do not set the
temperature too
low
Figure 10.3
Figure 10.4