LEXIBOOK RCDK100 Serie Manual De Instrucciones página 15

Play a CD
1. Once the device is turned on, the word « no » appears on the LED display indicating there
is no disc inside the CD compartment. Open the CD compartment door and place a disc on
the spindle with the printed label side facing up. And close the CD compartment door.
2. The LED display will show "--" for a few seconds then the total number of tracks on the disc
will appear on the screen.
3. You may press Backward or Forward button to select a specific track for playback.
4. Press Play button to start listening to music, the play indicator will light up. You can press
Backward or Forward button to select a specific track during playback as well.
5. Adjust the volume with the VOL/ON/OFF knob to the desired level.
6. During playback, you can press PLAY/PAUSE button to pause momentarily. When
pausing, the number on the display will blink.
7. To stop playback press Stop button. The play indicator will turn off.
Note: The CD player does not read burned CDs.
Repeat Playback
1. To repeat a track, first select the track you want to repeat, then press PLAY/PAUSE button
to play the track.
2. To repeat a single track press REPEAT/ALL button once. The LED indicator in the LED
display will flash.
3. To repeat all tracks, first select a track, then press PLAY/PAUSE button to play the track.
4. Press REPEAT/ALL button twice to repeat all tracks. The LED indicator in the LED display
will show a steady light.
5. To deactivate the Repeat/All feature, press REPEAT/ALL button until the LED indicator in
the LED display disappears.
Note: Once the "repeat all track" feature is activated, the Karaoke CD player will play
automatically all the songs again and again.
Make your playlist
With the PROGRAM feature you can make your own playlist. Before starting, make sure you
placed a CD in the CD compartment.
1. Press PROGRAM button twice, the LED display will show "00" and flash along with the
PROGRAM LED indicator.
2. Press Backward or Forward button to select a track.
3. Press PROGRAM button again to register the selected track number.
4. Repeat steps 2 and 3 above to program other tracks.
5. Once you made your playlist press PLAY/PAUSE button to start the programmed playlist.
The PROGRAM LED indicator will light up. You can press Backward or Forward button to
select a specific track.
6. To cancel the programmed sequence, switch the unit off by turning the VOL/ON/OFF knob
to the left.
7. When the device is not playing you can review or change the tracks programmed by
pressing PROGRAM button repeatedly.
8. To stop press STOP button.
Note: The REPEAT/ALL feature also operates under PROGRAM mode.
A maximum of 20 tracks can be programmed to play in any order.
RCDK100seriesIM1186_V13_217YL.indd 15
FUNCTIONS OF YOUR DEVICE
15 15
3/5/16 5:03 pm