Heath Zenith InTune Manual Del Usuario página 3

(F) SELECTING TUNES
IMPORTANT NOTE: Do not delete rear door default file sound.
Front Door Tunes:
Rear Door Tunes:
(G) SET THE VOLUME
TROUBLESHOOTING
The door chime does not play.
Batteries seem OK, but the chime does not work when installed:
The door chime plays when not intended (false triggers).
The door chime does not play when connected to the computer.
The door chime plays the entire tune length.
Code Setting
NOTE: Code positions 1 through 7 must be exactly the same for
both the push button and door chime for this system to function. Position
8 is NOT used to change the code setting. See Tune Settings.
or...
or...
EXAMPLE: In the push button, move the jumper at location "5" to
location "4". In the door chime, set the "5" dip switch to OFF and the "4"
dip switch to ON.
FIGURE 9
Code Setting