Alarms (Cv Models); Time-Out During Water Filling; Time-Out During Drink Production; No Water In The Water Tank (Di Models) - Fiamma MARINA Manual De Instrucciones

8. Alarms (CV models)

8.1.

TIME-OUT during water filling

When the water level probe does not detect water in the boiler, the machien automatically starts the
water filling. A volumetric counter controls the time of filling. If the water filling takes more time than
defined (120 seconds), the water filling is automatically interrupted. All LEDs start to blink.
In order to turn off the alarm, switch off the machine and switch it on again.
8.2.

TIME-OUT during drink production

A counter controls the duration of the drink production on the portion keys. If the drink production
takes longer than the predefined time (more than 5 seconds), the LED of the active portion key starts to
blink. If the counter does not receive any impulse up to 4 minutes, the production is interrupted. The
LED continues to blink until a new selection is made.
8.3.

No water in the water tank (DI models)

The water tank is equipped with water level probe. If the probe does not detect water for more than 3
seconds, the machine is automatically blocked. All LEDs start to blink. Once the water tank has been
filled with water, the machine returns to the normal functioning mode and the LEDs stop to blink.
In case the probe detects a low water level during drink production, the drink production is finished and
only then the LEDs start to blink.
Espresso Coffee Machine Marina by fiamma – Operating Manual
ENGLISH
23