Cleaning And Care; Storage - Nevadent SMD 24 A1 Manual Del Usuario

Cleaning and care

DANGER – ELECTRIC SHOCK!
► Always pull out the plug before cleaning the appliance. There is a risk of electric
shock!
► The appliance must be completely dry before connecting it to the socket again.
Never submerge the main unit
CAUTION – PROPERTY DAMAGE!
► Do not use any aggressive cleaning agents or solvents. These could damage the
plastic surfaces of the appliance.
♦ Remove the nozzle attachment
water.
♦ Clean the main unit
stubborn soiling add a little mild detergent to the cloth. Afterwards, wipe off with a
cloth moistened only with pure water. Then dry off the main unit
4
unit with a dry cloth.
♦ Remove the water tank
e
tank . Rinse the water tank
remaining water out of the water tank
♦ If you do not intend to use the appliance for a longer period, remove the lid
the water tank
back in the main unit

Storage

♦ Disconnect the appliance from the power supply by pulling the plug of the switched-off
appliance from the socket.
♦ Remove any water from the appliance and allow the appliance to dry completely
(see section Cleaning and care).
♦ Store the appliance in a dry and dust-free location out of direct sunlight.
SMD 24 A1
w
2
from the hand unit
w
and the hand unit
e
from the main unit
e
under running water. After cleaning, pour the
e
. Allow the water tank
w
.
4
or the hand unit in water or other liquids!
4
and rinse it off under running
4
with a soft, slightly damp cloth. For
w
and open the lid
e
into the washbasin.
e
to dry completely in air before placing it
w
and the hand
t
of the water
t
from
GB │ MT │
53 ■