Technical Data Technical Data; Ec Declaration Of Conformity - Husqvarna SR600-2 Manual De Instrucciones

Technical data
Technical data
Sweeper
Brush drum width, mm
Weight
Weight, kg
Noise emissions
(see note 1)
Sound power level, measured dB (A)
Sound power level, guaranteed L
Sound levels
(see note 2)
Equivalent sound pressure level at the operator's ear, measured
according to EN ISO 22868, dB(A):
Vibrations
(see note 3)
Equivalent vibration levels (a
according to EN ISO 22867, m/s
Front/rear handles:
Note 1: Measured together with Husqvarna approved accessories. Noise emissions in the environment measured as
sound power (L ) in conformity with EC directive 2000/14/EC. Reported sound power level for the machine has been
WA
measured with the original cutting attachment that gives the highest level. The difference between guaranteed and
measured sound power is that the guaranteed sound power also includes dispersion in the measurement result and the
variations between different machines of the same model according to Directive 2000/14/EC.
Note 2: Measured together with Husqvarna approved accessories. Reported data for equivalent sound pressure level
for the machine has a typical statistical dispersion (standard deviation) of 1 dB (A).
Note 3: Measured together with Husqvarna approved accessories. Reported data for equivalent vibration level has a
typical statistical dispersion (standard deviation) of 1 m/s
EC Declaration of Conformity (Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46-36-146500 declares that the Sweeper accessory Husqvarna/
Jonsered SR600-2 comply with the requirements of the COUNCIL'S DIRECTIVE:
- of May 17, 2006 "relating to machinery" 2006/42/EC.
The following standards have been applied: SS-EN ISO 12100:2010
SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has carried out voluntary type approval for
Husqvarna AB.
This accessory may only be used together with the intended brush cutter/trimmer, see under heading "Approved
accessories" in chapter Technical data in the machine's Operator's Manual. The certificates have the numbers:
SEC/15/2413 - SR600-2
Huskvarna February 18, 2015
Per Gustafsson, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)
TECHNICAL DATA
dB (A)
WA
) at handles, measured
hv,eq
2
SR600-2
590
6,5
105
109
97
4,4/5,1
2
.
English – 11