Metra 99-8907HG Instrucciones De Instalación página 3

4. Release the glove box retaining
cable, squeeze the sides and lower
the glove box. (Figure D)
5. On both sides unclip and remove
the climate control cables,
accessed under the dash on the
driver side and through the glove
compartment opening on the
passenger side. (Be sure to watch
where the cables are routed).
Note, this step is not necessary
in vehicles with automatic
climate controls. (Figure E, F)
Continued on next page
99-8907HG
Dash Disassembly
(Figure D)
Driver's side
(Figure E)
3
Passenger side
(Figure F)