Dash Disassembly - Metra 99-8907HG Instrucciones De Instalación

1. Unsnap and remove the outside
trim panel from the driver's side
dash. (Figure A)
2. Remove (2) Phillips screws from
the driver knee trim panel and
remove the panel. (Figure B)
3. Remove (2) 10 mm nuts now
exposed and lower the driver
airbag assembly (no need to
disconnect). (Figure C)
Continued on next page
99-8907HG

Dash Disassembly

(Figure A) (Figure B)
2
(Figure C)