SOUNDMASTER BCD 250 Introducción Manual página 10

Press the backlight on/off button to switch back light on
TO SET THE CLOCK TIME
1. In stand by Off mode. Press the FUNCTION/C.ADJ Button,
2. Press │◄ Button to set the DESIRED HOUR.
3. Press ►│Button to set DESIRED MINUTE.
4. After the desired time has set, display time will flash for 7-8 seconds, and then normal time is set.
TO SET ALARM FUNCTION
1. In stand by Off mode. Press the FUNCTION/C.ADJ Button twice, the time will blink and there will be an
alarm signal "AL" display on the LCD.
2. Press │◄ Button to set the DESIRED HOUR.
3. Press ►│Button to set DESIRED MINUTE.
4. After setting the alarm time as desired, press FUNCTION/C.ADJ Button to confirm.
WAKE UP TO ALARM BUZZER:
a. Press the ALARM/RAND BUTTON twice.
b. Alarm sign "AL" &" " will show on the LCD Display.
c. The buzzer will sound at the set alarm time.
WAKE UP TO RADIO:
a. Press the STAND BY button to switch power on.
b. Press the FUNCTION/C.ADJ Button to the RADIO function.
c. Tune the radio to a broadcasting station and adjust the volume as desired.
d. Press STAND BY Button to switch power off.
e. Press the ALARM Button until ' ' & "AL" sign show on the LCD Display.
f. The radio will sound at the set alarm time.
WAKE UP TO CD:
a. Press the STAND BY button to switch power on.
b. Press the FUNCTION/C.ADJ Button to the CD function.
c. Press STAND BY Button to switch power off.
d. Press the ALARM Button until ' ' sign show on the LCD Display.
e. The CD will sound at the set alarm time.
TURN OFF THE ALARM
To cancel alarm press ALARM/RAND button until " " or ' ' sign disappear on the LCD Display
ADJUST VOLUME
Press VOL. + button to increase the volume.
Press VOL. - button to decrease the volume.
ENGLISH
.
9