Temperature And Steam Setting - Philips GC4500 Serie Manual Del Usuario

Do not put perfume, vinegar, starch, descaling agents, ironing aids or
other chemicals in the water tank.
3 Close the water filling door ( 'click').

temperature and steam setting

Table 1:
Warning: Do not use steam or steam boost at low temperature, as indicated
in the below table. Otherwise, hot water may leak from the iron.
Fabric type
Linen
Cotton
Wool
Silk
Synthetic fabric
(e.g. acrylic, nylon,
polyamide, polyester)
1 Consult table 1 to set the temperature dial to the appropriate
setting for your garment.
2 Select Auto steam setting in the steam slider.
This iron is equipped with Auto steam control. According to the
temperature you select, the iron automatically provides the optimal
amount of steam for the best result.
3 Put the iron on its heel and plug it in. The temperature light goes on
to indicate that the iron is heating up.
4 When the temperature light goes out, the iron has reached the
correct temperature and you could start ironing.
Temperature Auto steam
setting control
MAX Automatically
adjusted to the
●●●
optimal amount
●●
●●
● No steam
EnGlish
7
Steam
boost
Yes
Yes
No
No
No