Regular Checks; Servicing - Wayscral EVERYWAY E-50 Manual Del Usuario

III.

Regular checks

Check the tightness of the bolts: lever, crank, pedals, stems. The
tightening torques to be applied are as follows:
COMPONENTS
Pedals on crank arms
Crank arm on bottom
bracket
Headset tightening
Steering tightness
Brake lever
Brake calipers
Seat
Seat post clamp
Wheel
Luggage rack
The other tightening torques depend on the size of the nuts: M4: 2.5 to
4.0 Nm, M5: 4.0 to 6.0 Nm, M6: 6.0 to 7.5 Nm. Tighten the screws
evenly to the required torque.
Regularly check the tyres (1) and in particular the tread of the rear tyre:
wear, cuts, cracks, pinching. Replace the tyre if necessary. Check the
wheel rims for excessive wear, warping, denting, cracks...
IV.

Servicing

For safety reasons and to keep the components in good working order,
you should have your bicycle regularly serviced by your retailer. Your
bicycle should also undergo regular maintenance by a qualified
technician.
First service: 1 month or 150 km
•
Check the components are properly tightened: crank arm,
wheel, stem, pedals, handlebars, seat clamp,
•
Check the operation of the gears,
•
Check and adjust the brakes,
•
Tighten and/or straighten the wheels.
RECOMMENDED
TORQUE (Nm)
30 - 40
30 - 40
14 - 15
4 - 6
6 - 8
6 - 8
18 - 20
30 - 40
4 – 6
63
SPECIFIC GUIDELINES
Lubricate the threads
Lubricate the threads
Immersion screw (stem)
Quick clamp
M5 screw
EN