System Settings - DragonTouch Vision 4 Lite Manual Del Usuario

EN
ISO: Auto/100/200/400/800/1600/3200/6400
Default setting is Auto.
ISO determines the camera's sensitivity to light and creates a trade-off between
brightness and resulting image noise. Image noise refers to the degree of graininess
in the image. In low light, higher ISO values result in brighter images, but with greater
image noise. Lower values result in lower image noise but darker images.
Time Watermark: On/Off
Default setting is On.
Turn on this setting and this camera will add a date stamp to the videos and photos
you take.
Diving Mode: On/Off
Default setting is Off.
Turn on Diving Mode and it can compensate for the lack of red light in underwater
scenes. Diving Mode is designed to be used in tropical and blue water, optimized for
use between 10 and 80 feet.
Special Effects: Normal/Black and white/Negative/Retro/Red/Green/Blue
Default setting is Normal.
FOV: Wide/Middle/Narrow
Default setting is Wide.
The FOV refers to how much of the scene (measured in degrees) can be captured
through the camera lens. Wide FOV captures the largest amount of the scene, while
Narrow FOV captures the least.

System Settings

Image Rotation: On/Off
Default setting is On.
Wifi: On/Off
Default setting is On.
10