Changing The Sound (A.c.bass) - JVC XM-R700SL Manual De Instrucciones

Playback mode and track title display
When an MD is played back, the playback mode and the title recorded on the track being played back appear at the
lower part of the unit's display. Also, on the remote control's display, the track title appears once if it is recorded.
Also, "LP2" and "LP4" indicators are on the remote control's display.
Playback mode:
There are four playback modes shown on the unit's display; SP (STEREO), LP2, LP4, and MN (MONO). Note that
MDs are played back in the same recording length as they were recorded.
SP: Indicates the tracks recorded in standard stereo recording mode on this unit or those recorded on an MD re-
corder incompatible with MDLP*.
LP2: Indicates the tracks recorded in 2 times long-hour stereo recording mode. The "LP2" indicator on the remote
control's display also lights up.
LP4: Indicates the tracks recorded in 4 times long-hour stereo recording mode. The "LP4" indicator on the remote
control's display also lights up.
MN: Indicates the tracks recorded in standard monaural recording mode on this unit or those recorded on an MD
recorder incompatible with MDLP*. The "MONO" indicator on the unit's display also lights up.
* MDLP features a new sound compression method (ATRAC3) and a 2 times (or 4 times) long-hour stereo
recording and playing function.
The MDLP logo is marked on the MD recorders and players compatible with MDLP. It is also marked on
MDs prerecorded in ATRAC3 (excluding recordable MDs).
Track title:
The track title will appear on the unit's and remote control's displays. If the title is long and cannot be displayed at a
time, it will be scrolled. If no title is given, "NO TITLE" will scroll on the unit's display but nothing will appear on
the remote control's display.

Changing the Sound (A.C.BASS)

You can choose one of the following sound modes. Each time you press the A.C.BASS button on the remote control,
the sound mode name changes as follows on both unit's and remote control's displays:
A.C.BASS
[In the case of remote control's display]
A.C.BASS : The A.C.BASS (Active Clear Bass) function is enabled and the bass level is automatically controlled
in conjunction with the sound volume.
The "A.C.BASS" indicator lights up on the unit's display and the
mote control's display.
TRAIN : The amount of sound leaking from the headphones will be reduced.
The
MANUAL : In this mode, you can adjust the tone. See "Adjusting Tone in MANUAL Sound Mode" on page 6.
The
(MANUAL EQ)
To cancel above function, press the A.C.BASS button on the remote control to exit above mode, i.e., to go out
, or indicator on the remote control's display.
5
A.C.BASS = TRAIN = MANUAL* = (Original display)
*: On the Unit's display, "MANUAL EQ" appears.
indicator lights up on the remote control's display.
indicator lights up on the remote control's display.
indicator lights up on the re-
,