Settings; Setting The Parameters (Menu) - KERN CGB Serie Instrucciones De Funcionamiento

Settings

Setting the Parameters (Menu)

This means you configure, or adapt, the balance to your user requirements by selecting
the parameter settings from a menu.
Example: Adapt balance to place of installation with "Extreme vibration"
Select (Code 1. 1. 4)
Step Press key
1. Turn off balance
2. Turn balance back on and,
while all segments
are displayed, press
$ To navigate within a
menu level; the last menu
option is followed by the
the first option
3. Select the 2nd menu level
4. Select the 3rd menu level
5. In menu level 3:
Select the desired option
repeatedly
6. Confirm new setting;
"o" indicates the currently
set option
$ Return to next higher menu
level (from the 3rd menu level)
$ Set other menu codes, if desired
7. Save parameter settings
and exit menu
or
$ Exit menu without saving changes [ON/OFF]
> Restart the application
Display
[ON/OFF]
[ON/OFF]
[TARE] briefly
Press [TARE]
repeatedly
[PRINT]
[PRINT]
Press [TARE]
repeatedly
Press [PRINT]
for 2 sec.
[PRINT]
[PRINT], [TARE]
Press [TARE]
for 2 sec.
1.
2.
...
9.
1.
1. 1.
1. 1. 2 o
1. 1. 4
1. 1. 4 o
1.
0.0 g
55