User's Manual - Powerworks 2200213 Manual De Utilización

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SV HR HU RO BG EL AR TR HE LT LV ET
SPECIFICATIONS
Model
Voltage
No load speed
Blade speed
Blade length
Cutting capacity
Measuered sound pressure
level
Guaranteed sound power
level
Vibration level
Weight without battery pack
DESCRIPTION
See figure 1.
1. Blade cover
2. Blade
3. Guard
4. Front handle
5. Micro switch
6. Trigger Switch
7. Rotate release
8. Rear handle
9. Battery
10. Battery release button
ASSEMBLY
UNPACKING
„ This product requires no assembly.
„ Carefully remove the product and any accessories
from the box. Make sure that all items listed in the
packing list are included.
„ Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
„ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
PACKING LIST
„ Hedge trimmer
„ Operator's manual
English (Original instructions)
2200213
60V
-1
3400 (±10%) min
-1
3400 (±10%) min
61 cm
27 mm
88 dB (A), k=3.0
102 dB (A)
<3.5 m/s², k=1.5 m/s²
3.8 kg
OPERATION
For complete charging instructions, refer to the Operator's
Manuals for your battery pack and charger models.
NOTE: To avoid serious personal injury, always remove the
battery pack and keep hands clear of the lock-out button
when carrying or transporting the tool.
INSTALL BATTERY PACK
„ Place the battery pack in the hedge trimmer. Align
groove in battery pack with raised rib on hedge
trimmer. See figure 2.
„ Make sure the latch on the hedge trimmer snaps
in place and that battery pack is secured in hedge
trimmer before beginning operation.
REMOVE BATTERY PACK
„ Locate the latch on the hedge trimmer and depress to
release the battery pack from the hedge trimmer. See
Figure 2.
„ Remove battery pack from the hedge trimmer.
When placing battery pack in your hedge trimmer,
be sure groove in battery pack aligns with raised rib
on hedge trimmer and latch snaps in place properly.
Improper assembly of battery pack can cause damage
to internal components.
STARTING THE HEDGE TRIMMER
See figure 3.
„ Remove the blade cover.
„ Install the battery pack.
„ For added safety, there is a micro switch (5) in the front
handle. When operating, hold the trimmer with both
hands, one hand to squeeze the micro switch, and the
other hand to squeeze the trigger switch (6).
STOPPING THE HEDGE TRIMMER
See figure 3.
„ Release the micro switch (5) and trigger switch (6) to
stop the hedge trimmer.
„ Remove battery pack from the hedge trimmer.
USING THE ROTATING REAR HANDLE
See figure 4.
„ Place the hedge trimmer on a flat and even surface.
1
CAUTION