Electrical Connection - Zehnder 84659 Instrucciones De Uso

English
2.3 - Location
To get the most out of your device, and for a better level of comfort, we recommend :
² Installing if possible close to points of high heat loss (windows, doors, etc.)
² Making sure that all objects (furniture, armchairs) are at least around 50 cm away from
front the front face of the device, to promote air circulation.
² Positioning the bottom of the unit at least 15 cm off the floor.

2.4 - Electrical connection

The technical specifications of your regulation unit are indicated on its nameplate.
Please take note of them before requesting any After Sales Service operation.
When connecting to the power network, you must be sure to adhere to :
² The voltage indicated on the plate ;
² The conventional colours :
Class 1 Brown : live, Blue or Grey : neutral, Green/Yellow : earth.
Class 2 Brown : live, Blue or Grey : neutral.
If the power cable is damaged, it needs to be replaced by the manufacturer, its after
sales service or a similarly authorised person in order to prevent any risk.
The originally fitted flexible cable is designed to be connected to the network via a
connection box that is to be situated behind the device, without an intermediate
electrical plug.
In a kitchen or bathroom, the connection box will be located at least 25 cm off the floor.
2.5 - Special installation rules for bathrooms
INSTRUCTONS FOR FRANCE (IN APPLICATION OF STANDARD NFC 15.100).
Instructions for other countries - the installation procedure must comply with current
standards and good working practice in the country where it is carried out.
10