Clarisonic FIT Serie Guía De Uso página 13

BRUSH HEADS
Brush heads need to be replaced every 3 months as the bristles become fatigued and less
effective over time. Once a week, remove the brush head from the device and rinse with warm
soapy water to remove any residue.
• To remove the brush head: 1) Grip the brush head firmly,
then push and twist it anti-clockwise; 2) Pull the head away
from the device.
• To attach the brush head: Push down and twist the brush
head clockwise until it snaps into place. Be sure you
hear a tight snap.
Tip: Use the brush head cap to easily remove and
attach the brush head with a simple twist.
push down
pull away
2
1
10