UFESA BV4635 Instrucciones De Uso página 6

●
Be careful not to flood the inner of mixing
adapter casing with water – after assembling on
the motor part, the motor can get flooded.
●
Do not use the mixer with empty mixing cup.
●
Be careful not to flood the bottom space of
mixing cup, containing clutch - after assembling
on the motor part, the motor can get flooded.
●
Do not put simultaneously the mixer and whisk
with toothed bar into the motor socket. In the
moment of start-up the mixer shall get damaged.
●
Do not use the mixing adapter nor the mixing
cup longer than 3 min., whereas the mixers and
whisks not longer than 10 min.
SUGGESTION
Information on the product
and suggestions for its use
●
The appliance is intended for domestic
use. In case it is used for food business purposes,
the warranty conditions shall change.
●
When finished using the appliance, unplug it and
wind the cord around the motor unit.
●
Do not wash metal parts in a dishwasher.
Aggressive cleaning agents used in such
machines cause that a/m parts get darker. Clean
them manually with traditional washing up liquids.
●
Put the mixer and whisk with toothed bar into the
motor socket marked with a star.
●
The manufacturer cannot accept any liability for
damage to the oven or personal injury resulting
from improper usage.
Technical data
Technical parameters are quoted at product
nameplate.
Permitted motor operation time:
– with mixers, whisks 10 min.
– with mixing adapter or mixing cup
Interval time before next operation (min.) 20 min.
Noise caused by the device (L ):
WA
– with mixers, whisks, mixing adapter 80 dB/A
– with mixing cup 84 dB/A
The mixers are produced in II insulation class, they
don't need grounding.
Ufesa mixers meet current norms requirements.
The devices meet the requirements of the directives:
– Low Voltage Device (LVD) – 2006/95/EC.
– Electromagnetic compatibility (EMC) – 2004/108/EC.
The product is marked with CE on the name plate.
All manuals and user guides at all-guides.com
Appliance elements
1
Mixer motor
2
Pusher button
3
Switch lever
4
Turbo button
5
Whisks or mixers sockets
6
Mixing adapter hole
7
Handle insert
8
Mixers: left/right with toothed bar
9
Whisks: left/right with toothed bar
10
Liquidising dics
11
Mixing attachment
12
Mixing cup
13
Doser
14
Lid
15
Knife cup
Preparing for operation
Before first use, wash all parts of the appliance that
come in contact with food in warm soapy water.
Device description
●
The mixer has 5 speed positions. The lever is used
to set up the particular rotation speed according
to the numbers: 0, 1, 2, 3, 4, and 5 on pusher
button, which helps to remove (push out) the
mixers or whisks from the mixer motor part.
●
Additionally, the drive has „turbo"
which helps to get the maximum rotation speed
immediately, regardless the speed set with the
lever. Such buttons are placed both on the right
and left sides of the casing intended for the
convenience of both left and right-handed users.
The „turbo" button is automatically blocked in „0"
position.
●
There are 2 sockets (holes), for whisks or mixers
3 min. assembling, placed on the bottom of the motor
part.
●
The insert handle, placed on the top of the motor
part, is made of the material increasing the comfort
of holding the mixer motor part.
●
There is a hole for mixing adapter or mixing cup
assembling at the back of motor casing. The hole is
covered with a mobile cover.
●
There is a clamp and a fastener in the lower part of
motor casing, for power cord winding around the
motor casing.
A
Mixer start-up and position
setting (rotation speed)
1 Place the ON/OFF switch in the „0" position - the
leftmost position. Install the selected tool.
2 Plug in the appliance.
3 Switch on the appliance by sliding the switch to
the right.
4 If you want to increase the rotation shift the lever
in position „5" direction, choose the desired rotation
speed.
5 In order to increase the rotation immediately,
regardless set speed, press and hold one of „turbo"
buttons (on the right or left side of the casing).
6 When you want to return to the previously selected
speed release „turbo" button.
Preparing for operations
OPERATION WITH WHISKS OR MIXERS
●
The whisks are intended to whipping eggs white
foam, cream, rubbing yolks with sugar, cream and
pancakes or omelettes dough preparation.
●
The mixers are intended to work the rubbed dough,
yeast dough, cheeses cakes, imbirbread cakes, etc.
●
The whisks and mixers shall be assembled in
sockets on the bottom of the robot.
1 Press until you feel the refusal – when the clamps
get fastened.
When assembled improperly, the parts fall
apart during operation.
button
2 Insert the mixer or whisk with toothed bar into the
socket marked with a star.
The reverse assembling of the mixers can
cause lifting up the dough (taking the
dough out of bowl).
The level of products inside the bowl
should not exceed the hight of mixers or
whisks working part (L).
1 cm L
OPERATION WITH LIQUIDISING DISC
●
Liquidizing disc is used for liquidizing boiled
fruit and vegetables such as: carrots, potatoes,
tomatoes, apples through the sieve. It partly
replaces the function of the mixing adapter.
1 Insert the liquidizing disc on the whisk with
toothed bar from the bottom side.
2 Insert the whisk into the socket marked with a star.
OPERATION WITH MIXING ADAPTER
B
You can use the mixing adapter for:
●
mixing liquids,
●
crumbling boiled vegetables and raw, soft fruit,
●
preparing different mayonnaise and pastes,
●
preparing soups for infants.
●
crushing ice (metal adapter only).
You can assemble the adapter after moving the cover.
1 Gently press the bolt and slide towards the
direction shown in the figure.
2 Insert the threaded part into the motor casing hole
and screw it turning right until you feel the refusal.
Inadequate screwing
adapter can result in clutch damage or the
adapter damage.
3 Put the adapter into the processed product and
switch the mixer on.
C
OPERATION WITH MIXING CUP
Hold the mixer in your hand all the time
during operation.
Mixing cup is intended for infant soups preparation,
milk shakes or pancake dough.
●
It has the label „500 ml max" on both sides, which
indicates the maximum level of product to fill the
cup and graphic scale to determine the volume
200 ml to 500 ml (according to the symbols in the
drawing beside).
1 After moving the cover (like during assembling the
adapter) assemble the cup the following way: Insert
the mixing cup on the motor part so that the 3 buckles
visible at the bottom of the cup got into the nuts of the
motor casing.
2 Holding the motor casing handle turn the cup
clockwise direction until you feel the refusal.
You shall obtain the proper connection, when the 3
buckles get under the motor casing, and the fastener
on the cup rib move on the other side of the spherical
buckle on the motor casing.
3 Fill the cup with products and put the cover with
the doser on – you can add next products to the cup
1 cm L
during operation.
After operation
1 Switch the mixer off and unplug it.
D
Depending on assembled equipment:
2 Push the whisks or mixers out with a pushing button.
3 Disassemble the liquidizing disc from the whisk.
●
Disassemble the mixing adapter or mixing cup in
reverse way to assembling it.
●
Wind the power cord on the motor part and put
the last winding under the insert.
E
of the mixing
F
G