Notice - Yamaha HY256-TL-SMF Manual De Instrucciones

Ocultar thumbs Ver también para HY256-TL-SMF:
Tabla de contenido

Publicidad

• Do not place the device in a location where it may come into contact with corrosive
gases or salt air. Doing so may result in malfunction.
• Do not look at the laser light. This product uses a laser. Be careful to avoid looking at
the ends of the optical fibers or the optical connectors. In the event you look at the
laser, it may damage your eyes.
Yamaha cannot be held responsible for damage caused by improper use or
modifications to the device, or data that is lost or destroyed.

NOTICE

To avoid the possibility of malfunction/ damage to the product, damage to data, or
damage to other property, follow the notices below.
• Avoid touching exposed connectors and metal parts to minimize the possibility of
bad connections.
• Drain all static electricity from your clothing and body before handling the card.
Static electricity can damage the card. Touch an exposed metal part of the host
device or other grounded object beforehand.
• Do not drop the card or subject it to physical shock as this can result in breakage
and/or malfunction.
Handling and maintenance
• Do not expose the device to excessive dust or vibration, or extreme cold or heat
(such as in direct sunlight, near a heater, or in a car during the day), in order to
prevent the possibility of panel disfiguration, unstable operation, or damage to the
internal components.
• Do not place vinyl, plastic or rubber objects on the device, since this might discolor
the panel.
• When cleaning the device, use a dry and soft cloth. Do not use paint thinners,
solvents, cleaning fluids, or chemical-impregnated wiping cloths.
• Condensation can occur in the device due to rapid, drastic changes in ambient
temperature — when the device is moved from one location to another, or air
conditioning is turned on or off, for example. Using the device while condensation is
present can cause damage. If there is reason to believe that condensation might
have occurred, leave the device for several hours without turning on the power until
the condensation has completely dried out.
4
HY256-TL-SMF Owner's Manual
PACARD_en_2 2/2

Publicidad

Tabla de contenido
loading

Tabla de contenido