Know Your Pressure Washer - Craftsman 580.767450 Manual Del Propietário

KNOW YOUR PRESSURE WASHER

Read this owner's manual and safety rules before operating your cleaning system.
Compare the illustrations with your cleaning system to familiarize yourself with the locations of various controls
and adjustments. Save this manual for future reference.
Dial-A-Cleaner™
Selector Knob
Recoil Starter
Fuel Cap
Air Filter
Choke Lever
Throttle Control Lever
Pump
Water Inlet
High Pressure Outlet
Adjustable Nozzle – Always attached to nozzle
extension. Adjust for high or low pressure; narrow or
fan spray.
Air Filter – Dry type filter element limits the amount of
dirt and dust that gets in the engine.
Choke Lever - Used to help start a cold engine.
Dial-A-Cleaner™ Selector Knob – Selects any one
of three chemicals or the clean water system rinse.
Fuel Cap – Fill engine with regular unleaded fuel here.
High Pressure Hose – Connect one end to the spray
gun and other end to the high pressure outlet.
High Pressure Outlet – Connection for high pressure
hose.
Hose Reel — Used for storing hose while unit is not in
use. Hose must be detached from pump and spray
gun before storage.
System Rinse, Detergent and
Chemical Reservoirs with
Internal Filter and Baffle
Adjustable Nozzle
Nozzle Extension - Attach to spray gun to use
adjustable nozzle.
Oil Fill Cap/Dipstick – Fill engine with oil here. See
page 7 for oil recommendations and filling instructions.
Pump – Develops high water pressure.
Recoil Starter – Used for starting the engine.
Spray Gun – Controls the application of water onto
cleaning surface with trigger device. Includes safety
latch.
System Rinse, Detergent and Chemical Reservoirs
with Internal Filter and Baffle – Used to provide
detergent or other chemicals to the low pressure water
stream.
Throttle Control Lever – Sets engine in starting
mode for recoil starter and stops running engine.
Water Inlet – Connection for garden hose.
5
Spray Gun
High Pressure Hose
Hose Reel
Oil Fill Cap/Dipstick
Nozzle Extension