Metra 99-7805CH Instrucciones De Instalación página 3

4. Unclip and remove the coin holder from
the 12 volt socket/coin holder assembly.
(Figure E)
5. Remove (1) Phillips screw under coin
holder then unclip and remove 12 volt
socket/coin holder assembly. (Figure F)
DASH DISASSEMBLY
(Figure E)
(Figure F)
(CONT.)
6. Remove (4) Phillips screws securing
the pocket assembly then unclip and
remove the pocket. (Figure G)
Continued on next page
(Figure G)
REV. 3/7/2018 INST99-7805CH
3