Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Insert the plug (5) into a wall outlet (ill.
Place the assembled cup and blade unit in the motor unit (4). Ensure the taps on
the cup are aligned with the notches on the motor unit (4) (ill.
Push down on the assembled cup and blade unit and turn clockwise until the
interlock mechanism is engaged and the appliance is switched on (ill.
NOTE:
- To ensure even blending, remove the assembled cup and blade unit after a few
seconds and give it a shake to mix the ingredients.
- Do not operate the appliance continuously for more than 1 minute when using
the large cup. Do not operate the appliance continuously for more than 15
seconds when using the small cup. Allow the appliance at least 1 minute to
cool down between operation cycles. Operate the appliance for a maximum
of 3 consecutive times, then allow the appliance to cool down for at least 10
minutes before the next use. Do not exceed the maximum operation times.
- The appliance has a protection from overheating which automatically turns the
appliance off when the rated power is exceeded due to heavy load, when the
blades are prevented from turning or after too many operation cycles. If this
happens, remove the cup and unplug the appliance from the wall outlet.
Restart after the unit is cool down.
Once the ingredients have reached the desired consistency, turn the assembled
cup and blade unit counterclockwise to switch the appliance off (ill.
If necessary, remove assembled cup and blade unit from motor unit (4) and shake
ingredients in cup to re-distribute.
Remove the assembled cup and blade unit from the motor unit (4) by lifting it
upwards. Place it on a clean, flat and stable surface with the blade unit on top
(ill.
n
).
Disconnect the plug (5) from the wall outlet (ill.
Carefully unscrew the blade unit from the cup by turning it counterclockwise
(ill.
p
).
Pour the blended ingredients into a suitable container. Alternatively, the cup can
be used as a drinking cup by placing either the travel lid (9) or the drinking rim
(8) on the cup. Place the chosen accessory on the cup (ill.
the quick seal of the travel lid (9), push it up to open or down to close (ill.
NOTE:
- When storing food in the cup ensure the
quick seal is closed securely. Place the cup upright to avoid spilling.
OPERATION
j
9
9
).
).
o
travel lid
(9) is sealed tight and the
k
).
l
).
m
)
q
). Open and close
r
).
Publicidad
Tabla de contenido
Solución de problemas
