7.0 - Telephone Book Programming - SILENTRON 5500 SILENYA HT Manual Del Usario

c) Control panel with GSM module If a GSM module is present, always enter the PIN of the SIM CARD with the number "1234". Then insert
the SIM into the GSM module before turning on the device. Failing this, the display with show "Turn off and insert SIM".
6.2 PRELIMINARY STEPS
a) Insert the SIM card (only with control panels with a GSM module)
b) Connect power supply (charged battery and/or 230V)
c) The firmware version code will show on the display
Press ↵ and select a language by scrolling with ↑ ↓
d)
Insert factory code 0 0 0 0 ↵
e)
Insert time and date by pressing the numbers, then press ↵ . Use ← in case of error
f)
Insert the USER CODE and the INSTALLER CODE (4-8 digits ↵)
g)
Note: In the case of neighbouring systems, the USER CODE must always be different since two or more control panels with the same USER
code will activate all the internal/external sirens and all PA signalling devices present and within radio range, regardless of which system these
belong to. However, use the same code if this effect is required in neighbouring systems within radio range.
Note: Programming can be performed at any time if the INSTALLER CODE is entered first.
Once the installer code is confirmed the menu is automatically accessed. Use the ↑ ↓ keys to scroll through the menu:
h)
PHONE BOOK ↑
↵ CONFIRM ↓
EXTRAS ↑
↵ CONFIRM ↓
DIG. PROTOCOL ↑
↵ CONFIRM ↓
The subsequent programming can start from any one of the above-mentioned menus, using ↵ to confirm.
7.0 – TELEPHONE BOOK PROGRAMMING
Using the device similarly to a cellular phone, insert the names and telephone numbers of the persons who will receive the six vocal messages
and also the six free programmable SMSs to warn the persons called of the events described below. Each number can be linked to one or
more events so as to warn only the specific person of that event. Up to 63 telephone numbers can be programmed.
Note: Position 64 must always be used to programme the number provided by the SIM card service provider in order to obtain information on
the remaining credit (€ key).
Note: Checking telephone line: In accordance with regulations, the control panel listens for the tone indicating a free PSTN line and makes the
call only if this tone is correct. If the line tone is disturbed, checking can be cancelled by inserting ∗ in front of the number being programmed
(press ↑ ).
Note: Space between numbers: If you wish to place a space between the numbers press ↓ between one number and the next.
a) Events programmed at the factory (default):
1) Intrusion alarm
3) Manual alarm with siren activation (panic)
5) Technical sensors alarm (smoke, water, gas)
PHONE BOOK↑
↵ CONFIRM ↓
PHILIP
↵ 2223334567
SILENTRON – made in Italy
Storing of telephone numbers
Programming remote controls,
keypads various detectors
Control of digital alarmControl of
transmissions to security services
2) Tamper alarm
4) Manual alarm without siren activation (robbery/medical)
6) low battery warning (control panel, detectors, keypads, bidirectional sirens)
MEMORY ↑
↵ ↵ CONFIRM ↓
SAVED
↵ ↵ 2223334567
MESSAGES ↑
↵ CONFIRM ↓
SETTINGS ↑
↵ CONFIRM ↓
PC REMOTE MANAG ↑
↵ CONFIRM ↓
ADD NAME
↵
- - - - - - - - - - - - -
VOCAL MESSAGES
↵ - - - - - -
VOCAL MESSAGES
↵ - 2 3 - - 6
COPYRIGHT SILENTRON DS5500/1/2/3BA080228GM
FACTORY CODE
0 0 0 0
Recording vocal messages
and SMSs
programming home automation
unctions and settings for
specific operations
Control of transmissions to
installer modem for maintenance
and remote management
ADD NUMBER
- - - - - - - - - - - - -
Enter numbers (from 1 to 6)
of events required.
Number with vocal message.
Example: 2 intrusion alarm
3 manual alarm
6 low battery
8