Publicidad
Idiomas disponibles
Idiomas disponibles
I N S T R U C T I O N S
IMPORTANT:
The temperature of the IMETEC footwarmer complies with international safety
standards. The appliance therefore provides the right amount of warmth and not
dangerous heat.
Method of use
The temperature control of the IMETEC footwarmer has 2 positions:
0 off
1 low temperature
2 high temperature
0 off
Plug into the mains socket. Turn the footwarmer on by selecting position 2 on the control.
This will warm the appliance rapidly. After 20 minutes, turn the control to position 1 (low
temperature) to maintain the temperature reached.
SPECIAL PRECAUTIONS
- Do not use the appliance when wearing shoes.
- Do not use the appliance to heat animals.
- Do not use the appliance if it shows signs of damage.
I N S T R U C T I O N S A N D P R E C A U T I O N S F O R W A S H I N G
HAND WASH (40°)
LINING
The appliance has a woollen lining that can be removed and washed. We recommend
washing it BY HAND in warm water (max. 40° C).
IMPORTANT:
The part connected to the lead cannot be washed or dry cleaned.
To remove stains from the external fabric, use a damp cloth or a brush, ensuring that the
footwarmer does not absorb any water. Even if it is slightly damp, it must be left to dry
naturally.
DO NOT USE THE FOOTWARMER IF IT IS DAMP.
S T O R A G E
When the appliance is not in use, keep it in a dry place and do not place heavy objects on it as they
could cause creases.
Examine the appliance and the lead frequently to verify any signs of wear and tear. In the event of
such signs, or any malfunction, take the appliance to an authorised IMETEC Technical Service
Centre.
A N D
P E R I O D I C A L
6
F O R
U S E
C H E C K S
Publicidad
