LanParty NFII ULTRA Manual Del Usuario página 30

1
Quick Setup Guide
1.6.9 Genie BIOS Setting
Current CPU Frequency is
Full Screen LOGO Show
======= CPU/DRAM Clock Setting =======
CPU Clock Spread Spectrum
AGP Clock Spread Spectrum
CPU Clock Setting
AGP Clock Setting
CPU Ratio
DDR DRAM Clock
Current DDR Frequency is
======= OverClocking Control =======
Current CPU Voltage is
Current DIMM Voltage is
CPU Voltage Control
AGP Voltage Control
Chipset
DIMM Voltage Control
↑↓→← Move
======= Onboard Device Control =======
BIOS Flash Protect
nVidia Lan Chip Control
nVidia Lan MAC Address
X
MAC(NV) Address Input
IEEE1394 Chip Control
RTM Lan Device Control
RTM Lan Boot ROM
Serial ATA Control
HP372N RAID Control
The screen above list all the fields available in the Genie BIOS Setting submenu,
for ease of reference in this manual. In the actual CMOS setup, you have to
use the scroll bar to view the fields. The settings on the screen are for refer-
ence only. Your version may not be identical to this one.
30
Phoenix - AwardBIOS CMOS Setup Utility
Genie BIOS Setting
0 MHz
Enabled
Disabled
Disabled
100 MHz
Auto
Default
By SPD
Auto
Auto
Voltage Control Auto
Auto
Enter:Select +/-/PU/PD:Value
F5:Previous Values F6:Fail-Safe Defaults
Disabled
Enabled
Disabled
Press Enter
Enabled
Enabled
Disabled
Disabled
Enabled
Item Help
Menu Level
F10:Save ESC:Exit F1:General Help
F7:Optimized Defaults