LanParty NFII ULTRA Manual Del Usuario página 45

The installation procedure will lead you to install the driver
from a diskette. The diskette is included in the system board
package.
To install the RAID drivers:
1. Insert the "HighPoint 372 N RAID Drivers" diskette.
2. Follow the installation instructions shown on the screen.
3. Reboot the system for the driver to take effect.
Note:
Refer to the HighPoint RAID User's Manual for more informa-
tion about the RAID drivers. The manual is included in the CD.
2.3.6 HighPoint RAID Utility
This utility is used to configure and manage RAID on drives con-
nected to the RAID IDE connectors.
To install the utility, please follow the steps below.
1. On the left side of the autorun screen, click the "TOOLS"
icon.
2. Click "HighPoint RAID Utility" on the main menu.
3. Follow the installation instructions shown on the screen.
4. Reboot the system for the driver to take effect.
Note:
Refer to the HighPoint RAID User's Manual for more informa-
tion about the utility. The manual is included in the CD.
2.3.7 Winbond Hardware Monitor
The system board comes with the Winbond Hardware Monitor
utility contained in the provided CD. It is capable of monitoring
the system's hardware conditions such as the temperature of the
CPU and system, voltage, and speed of the CPU and system fans.
It also allows you to manually set a range to the items being
monitored. If the values are over or under the set range, a warn-
ing message will pop-up. The utility can also be configured so that
a beeping alarm will sound whenever an error occurs. We rec-
2
English
45