Sonoff DIY 4CH Manual De Usuario página 12

SONOFF TECHNOLOGIES CO., LTD.
5. Add the device
Tap "+" and select "Quick Pairing", then operate following the prompt on the APP.
Compatible Pairing Mode
If you fail to enter Quick Pairing Mode (Touch), please try "Compatible Pairing Mode "
to pair.
Long press any pairing button for 5s until the Wi-Fi LED indicator changes in a
1
cycle of two short flashes and one long flash and release. Long press any pairing
button for 5s again until the Wi-Fi LED indicator flashes quickly. Then, the device
enters Compatible Pairing Mode .
2 Tap "+" and select " Compatible Pairing Mode " on APP.
Select Wi-Fi SSID with ITEAD-****** and enter the password 12345678, and then
go back to eWeLink APP and tap "Next". Be patient until pairing completes.
Specifications
Model
Input
Max. Load
RF
Wi-Fi
Operating systems
Working temperature
Material
Dimension
4CHR3 does not support the remote controller with 433.92MHz.
4CHR3/4CHPROR3
4CHR3: 100-240V AC 50/60Hz
4CHPROR3: 100-240V AC 50/60Hz (DC: 9-23V)
4CHR3: 10A/2200W/Gang 16A/3500W/Total
4CHPROR3: 10A/2200W/Gang 40A/8800W/Total
433.92MHz
IEEE 802.11 b/g/n 2.4GHz
Android & iOS
-10℃~40℃
PC V0
145x90x34mm
11
Add Device
Quick Pairing
WIFI devices can be added in this mo
de(make sure the device is in pairing
mode).
Scan QR code
GSM devices and devices with QR co
de can be added in this mode.
Sound Pairing
Add device in this mode if your
devic e support this feature.
English