Tripp-Lite PDUMH30AT Manual Del Propietário página 8

Features
continued
6
Output Circuit Breakers: Two circuit breakers protect equipment connected to
each load bank against overloads. If a breaker trips, the circuit is overloaded and
you need to reduce the load connected to the circuit breaker's load bank. Press
the circuit breaker button to reset and restore power.
7
Ground Connection: Allows you to connect a user-supplied ground wire between
the PDU and any equipment that requires a chassis ground.
8
Cord Retention Bracket (Optional Installation): When installed on the PDU,
cord retention brackets provide secure attachment points for connected
equipment power cords.
9
ENVIROSENSE Port (PDUMH30ATNET & PDUMH30HVATNET): Use this port to
connect a Tripp Lite ENVIROSENSE environmental sensor to provide remote
temperature/humidity monitoring and a dry contact interface to control and
monitor alarm, security and telecom devices. Visit www.tripplite.com for ordering
information. Note: Do not connect a keyboard or mouse to this port.
10
Configuration Port (PDUMH30ATNET & PDUMH30HVATNET): Use this port to
provide a direct terminal connection to a computer with a terminal emulation
program. A serial cable (part number 73-1025) is included with the PDU. If you
need to order a replacement cable, visit www.tripplite.com
11
Network Interface (PDUMH30ATNET & PDUMH30HVATNET): Use this RJ-45
jack to connect the PDU to the network with a standard Ethernet patch cable.
The Link LED
shown in the table below. This port is not compatible with PoE (Power Over
Ethernet) applications.
A Link LED Color
Off No Network Connection
Flashing Amber 100 Mbps Network Connection
Flashing Green 10 Mbps Network Connection
12
LED Indicators: When the PDU is connected to a live AC power source, the
Primary or Secondary input LED illuminates to indicate which source is supplying
power to the PDU outlets. LEDs also illuminate to indicate which load bank's
current is being displayed. There are five indicators: Twistlock Outlet, Bank 1,
Bank 2, Primary Input and Secondary Input.
201008118 93-3040.indb 8
and Status LED indicate several operating conditions, as
A B
Network Operating Conditions
B Status LED Color
Off Card Not Initialized
Steady Green Card Initialized and Operational
Flashing Amber Error - Card Not Initialized
8
3/1/2011 9:58:43 AM