Installation; Mounting The Pdu - Tripp-Lite PDUMH30AT Manual Del Propietário

Installation

Mounting the PDU

The PDU supports 2U rack mounting or surface mounting (e.g. on a wall, on a desk
or under a counter).
Note: The user must determine the fitness of hardware and procedures before mounting. The PDU and
included hardware are designed for common rack and rack enclosure types and may not be appropriate for all
applications. Exact mounting configurations may vary.
2U Rack Mounting
1A Attach the included mounting
brackets to the sides of the PDU
with the included screws.
2A After attaching the brackets,
position the PDU in the rack and
install four user-supplied screws
through the bracket ears and into
the rack rails.
Surface Mounting
1B Attach the included mounting
brackets to the sides of the PDU
with the included screws. Note: If
you need to change the
orientation of the PDU to match
the mounting surface, rotate the
mounting brackets in 90°
increments as required before
attaching.
2B Mount the PDU to a stable surface
by inserting four user-supplied
screws through the bracket ears
and into appropriate mounting
holes. Make sure the mounting
surface and screws are capable of
supporting the combined weight of
the PDU and any attached
equipment cords.
201008118 93-3040.indb 3
1A
2A
1B
2B
3
3/1/2011 9:58:36 AM