Machine Description; General Machine Description - Husqvarna HTC 950 RX Manual De Usuario

Machine description

3 Machine description
3.1

General machine description

HTC 950 RX is designed for grinding in large spaces. It is used to grind, coarse grind,
prepare and polish concrete, natural stone and terrazzo floors or other materials
specified in this manual or material recommended by HTC. The machine is a perfect
choice for removing coverings and grinding concrete floors according to the HTC
Superfloor method, which is an environmentally-friendly method for grinding and
polishing concrete floors.
Thanks to the fact the machine can be operated with the help of radio control, the work
is significantly simplified and the grinding time lengthened. Furthermore, the work is
more effective, since the discharging of the dust extractor can be performed while the
machine is radio controlled.
The machine is also light and easy to transport, load and unload because of the inbuilt
battery operation.
The machine is constructed from a number of main components, see Figure 3-1, page
11 and Figure 3-2, page 12. Since it is equipped with four grinding discs, the
machine is balanced and easy to use, which results in more efficient stripping and better
grinding results. It also has an integrated weight system for adjusting the grinding
pressure, which makes the machine perfect for those with high demands for flexibility.
The handle can be set in a number of different tilt positions. Choose a position that suits
you best, when you want to operate the machinery manually.
The machine's grinding head is covered by a floating grinding cover to guarantee that
the operator will not come into contact with rotating machine parts, and also that
exposure to dust is minimised. The cover together with the connected vacuum system
provide the conditions needed for a good work environment. The cover has a moveable
overlap section with the purpose of optimising the dust uptake, since the cover is always
in contact with the surface.
Always make sure that a dust extractor is connected to the grinder during dry grinding
to prevent as far as possible exposure to dust particles of operators, people in the
vicinity, the grinder and other equipment.
The machine can be easily equipped with a large number of tools, depending on the
floor material to be ground. For other tools, go to HTC's website
www.htc-floorsystems.com
HTC 950 RX is equipped with the Mist Cooler system for effective cooling of the
grinding tools. This system enables a very fine water mist to be diffused through a
nozzle onto the floor surface, which cools the tools, making the grinding more effective.
10
for more information.
HTC 950 RX
5.0