Husqvarna HTC 950 RX Manual De Usuario página 27

HTC 950 RX
Tip!
We recommend that the weights are folded up during grinding, since if the
grinding pressure is too high and the tool is wrong, it can cause damage to the
machine and the floor.
To obtain a greater grinding pressure, and thereby increased grinding effect, the weights
are lowered forwards, see Figure 4-6, page 21.
Figure 4-6. Weights lowered forwards
During normal grinding as well as during transport of the machine, the weights should
be placed in the up position, see Figure 4-7, page 21.
Figure 4-7. Weights in the up position
When changing tools and when using tools with a high removal rate (T-Rex™), the
weights should be folded back, see Figure 4-8, page 22.
5.0
Operation
21