Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Section 4 Operation
Edit Ramp
3. Once the
press
and then highlight
Edit Ramp
Edit Step
Menu
The ramp program has an
When enabled this feature pauses the ramp timer until the temperature reaches setpoint, ± variance.
This assures the temperature reaches setpoint, ± variance, before the ramp program continues to the
next step.
5. Scroll down to view the
feature. Press
to enable/disable.
Start Temp
Stop Temp
Duration (min)
Assured Soak
Menu
You can enable an alarm to sound when each step and/or the program is complete, see
Settings - Basic Settings
4-48
portion is complete
Edit Step
.
Assured Soak
feature that can be enabled for each step independently.
Assured Soak
xxx.xx
xxx.xx
xxxxx
in this section.
Edit Step
4. Use
to enter the parameters for
each step. The maximum
1000 minutes.
Step #
Start Temp
Stop Temp
Duration (min)
Menu
Other than step one, the circulator automatically
Start Temp
sets the
from the previous step. This value cannot be
changed.
6. After all the desired steps are built, keep press-
ing
until the Start Display appears.
SP1
20.00°C
24.29 °C
Duration
for a step is
xx
xxx.xx
xxx.xx
xxxxx
Stop Temp
with the
Menu
In
Thermo Scientific
Publicidad
Tabla de contenido
