Settings - Display Options - Thermo Scientific ADVANCED Serie Manual Del Usuario

Settings - Display Options

Temperature Resolution, the displayed Language, the Display Contrast and the Display Delay.
Temp. Unit
1. With
Use the up/down arrows to highlight the desired
temperature scale.
Press .
C
F
K
Menu
Language
3. With
the up/down arrows to highlight the desired lan-
guage. (Scroll down for additional languages.)
Press .
English
Deutsch
Francais
Español
Menu
Note Holding for five seconds resets the display contrast to the default level and also brings up
the language menu to change, if needed, the displayed language.
Display Delay
5. With
to enable/disable it.
Use the up/down arrows to highlight the time
and press again.
Use the up/down arrows to change the value.
Once the desired delay is displayed press
Thermo Scientific
is used to view/adjust the circulator's Temperature Units, the
highlighted press
highlighted press . Use
highlighted press
.
Temp. Resolution
. 2. With
press .
Use the up/down arrows to highlight the desired
resolution. Press
0.01
0.1
Display Contrast
4. With
.
Press again and use the up/down arrows to
change the contrast. With the desired contrast
showing, press
Contrast

Delay
Display Delay
With
Display showing, if no arrows are pressed the
Start Display changes to the Status Display after
the delay expires, see pages 4-2 and 4-3.
Section 4 Operation
highlighted
.
Menu
highlighted press
again.
32
Menu
60 sec
Menu
enabled and the Start
4-51